Quote: Originally Posted by PaperBagPrincess Shae, when I did these before I tried printing the design once, instead of a magazine clipping, the ink always ran on me. Guessing because I have an ink jet. Did you have any problems with the ink running?
Thanks! hey there – yes, you must use a laser printer. lasers use toner (powder substance) instead of ink and require laser-specific paper that doesn't easily absorb water as regular copy paper.
a few other tips:
if you don't have access to a color laser printer you can get a few sheets printed at staples or something which will probably cost a few bucks (be aware that colors on your computer screen differ from what you will see on paper). i was able to fit 120 of the little circles on a sheet of paper and 30 of the large ones on another sheet so you'll only need to print a few sheets of each!
i used aleene's clear gel tacky glue from michaels to adhere the paper to the marble. it worked great! make sure to smooth out any air bubbles before the glue dries.
i used weldbond, also from michaels, to bond the magnet to the back of the paper/marble. this glue was a little frustrating to work with and think there are probably better glues that you can experiment with. i just chose to stick with it because it was the only brand that claimed to be "green".
if you buy your canisters from another supplier other than specialtybottle.com make sure to measure the height and width of your marbles and canisters so they fit perfectly.
also, as i mentioned below, make sure to get extra marbles since ALOT of them will likely have imperfections or dimples in them.
just holler if you have other questions!